Customized cnc plasma machine for cutting carbon steel plates and pipes
Usually, a good quality plasma power can provide higher accuracy. But even using the same type plasma power, different operation will produce parts of different quality. It is because there are still improved place for cnc plasma power, especially cutting thick carbon steel. Dekcel would like to recommend you the CNC Plasma Cutter for sale with good price.
In order to finish the carbon steel cutting work perfectly, users need to pay attention to the usage and maintenance of cnc plasma power supply. The notes are as follows.
1. It is better to be in accordance with the cutting table parameters when cutting carbon steel, such as arc pressure, cutting height, perforation height, etc.;
2. Ensure sufficient gas pressure and flow. The pressure at normal cutting level shall be no less than 9 kg (airborne power supply is not less than 6 kg).
3. Please ensure the cnc plasma machine has the access to dissipate heat before stopping the cutting process. How to do it? Just need to pay attention to the noise of fan which is inside of the control box. As long as it is becoming low, then it is ok for users to stop using the cnc machine for cutting carbon steel.
4.Users are supposed to clean the whole cnc plasma machine every two month to guarantee the normal operation. Generally speaking, we need to use air compressor to blow the dust and fume.
Cnc laser power parameters of domestic and American brands
Huayuan power supply
45A 6 mm carbon steel
63A 8 mm carbon steel
100A 15mm carbon steel
160A 20mm carbon steel
American Hypertherm power supply
45A 8mm carbon steel 5mm stainless steel
65A 12mm carbon steel 8mm stainless steel
85A 16mm carbon steel 12mm stainless steel
105A 22mm carbon steel 18mm stainless steel
125A 25mm carbon steel 20mm stainless steel
200A 30mm carbon steel 25mm stainless steel
Hope this article will help you. If you have any questions, please contact us as soon as possible. Jinan Dekcel Cnc Euipment Co., Ltd will always be there for you.